FFmpeg 2.2.16
Version Matrix Source
2.2.16 ❭ Filters ❭ Video ❭ scale
Since* 0.7
#

Scale (resize) the input video, using the libswscale library.

The scale filter forces the output display aspect ratio to be the same of the input, by changing the output sample aspect ratio.

If the input image format is different from the format requested by the next filter, the scale filter will convert the input to the requested format.

#

Options

The filter accepts the following options, or any of the options supported by the libswscale scaler.

See the ffmpeg-scaler manual for the complete list of scaler options.

width, w, height, h

Set the output video dimension expression. Default value is the input dimension.

If the value is 0, the input width is used for the output.

If one of the values is -1, the scale filter will use a value that maintains the aspect ratio of the input image, calculated from the other specified dimension. If both of them are -1, the input size is used

If one of the values is -n with n > 1, the scale filter will also use a value that maintains the aspect ratio of the input image, calculated from the other specified dimension. After that it will, however, make sure that the calculated dimension is divisible by n and adjust the value if necessary.

See below for the list of accepted constants for use in the dimension expression.

interl

Set the interlacing mode. It accepts the following values:

1

Force interlaced aware scaling.

0

Do not apply interlaced scaling.

-1

Select interlaced aware scaling depending on whether the source frames are flagged as interlaced or not.

Default value is 0.

flags

Set libswscale scaling flags. See the ffmpeg-scaler manual for the complete list of values. If not explicitly specified the filter applies the default flags.

size, s

Set the video size. For the syntax of this option, check the "Video size" section in the ffmpeg-utils manual.

in_color_matrix, out_color_matrix

Set in/output YCbCr color space type.

This allows the autodetected value to be overridden as well as allows forcing a specific value used for the output and encoder.

If not specified, the color space type depends on the pixel format.

Possible values:

auto

Choose automatically.

bt709

Format conforming to International Telecommunication Union (ITU) Recommendation BT.709.

fcc

Set color space conforming to the United States Federal Communications Commission (FCC) Code of Federal Regulations (CFR) Title 47 (2003) 73.682 (a).

bt601

Set color space conforming to:

  • ITU Radiocommunication Sector (ITU-R) Recommendation BT.601

  • ITU-R Rec. BT.470-6 (1998) Systems B, B1, and G

  • Society of Motion Picture and Television Engineers (SMPTE) ST 170:2004

smpte240m

Set color space conforming to SMPTE ST 240:1999.

in_range, out_range

Set in/output YCbCr sample range.

This allows the autodetected value to be overridden as well as allows forcing a specific value used for the output and encoder. If not specified, the range depends on the pixel format. Possible values:

auto

Choose automatically.

jpeg/full/pc

Set full range (0-255 in case of 8-bit luma).

mpeg/tv

Set "MPEG" range (16-235 in case of 8-bit luma).

force_original_aspect_ratio

Enable decreasing or increasing output video width or height if necessary to keep the original aspect ratio. Possible values:

disable

Scale the video as specified and disable this feature.

decrease

The output video dimensions will automatically be decreased if needed.

increase

The output video dimensions will automatically be increased if needed.

One useful instance of this option is that when you know a specific device’s maximum allowed resolution, you can use this to limit the output video to that, while retaining the aspect ratio. For example, device A allows 1280x720 playback, and your video is 1920x800. Using this option (set it to decrease) and specifying 1280x720 to the command line makes the output 1280x533.

Please note that this is a different thing than specifying -1 for w or h, you still need to specify the output resolution for this option to work.

The values of the w and h options are expressions containing the following constants:

in_w, in_h

the input width and height

iw, ih

same as in_w and in_h

out_w, out_h

the output (scaled) width and height

ow, oh

same as out_w and out_h

a

same as iw / ih

sar

input sample aspect ratio

dar

input display aspect ratio. Calculated from (iw / ih) * sar.

hsub, vsub

horizontal and vertical input chroma subsample values. For example for the pixel format "yuv422p" hsub is 2 and vsub is 1.

ohsub, ovsub

horizontal and vertical output chroma subsample values. For example for the pixel format "yuv422p" hsub is 2 and vsub is 1.

#

Examples

  • Scale the input video to a size of 200x100: 

    scale=w=200:h=100

    This is equivalent to: 

    scale=200:100

    or: 

    scale=200x100

  • Specify a size abbreviation for the output size: 

    scale=qcif

    which can also be written as: 

    scale=size=qcif

  • Scale the input to 2x: 

    scale=w=2*iw:h=2*ih

  • The above is the same as: 

    scale=2*in_w:2*in_h

  • Scale the input to 2x with forced interlaced scaling: 

    scale=2*iw:2*ih:interl=1

  • Scale the input to half size: 

    scale=w=iw/2:h=ih/2

  • Increase the width, and set the height to the same size: 

    scale=3/2*iw:ow

  • Seek for Greek harmony: 

    scale=iw:1/PHI*iw
scale=ih*PHI:ih

  • Increase the height, and set the width to 3/2 of the height: 

    scale=w=3/2*oh:h=3/5*ih

  • Increase the size, but make the size a multiple of the chroma subsample values: 

    scale="trunc(3/2*iw/hsub)*hsub:trunc(3/2*ih/vsub)*vsub"

  • Increase the width to a maximum of 500 pixels, keep the same input aspect ratio: 

    scale=w='min(500\, iw*3/2):h=-1'