Force frame parameter for the output video frame.

The setparams filter marks interlace and color range for the output frames. It does not change the input frame, but only sets the corresponding property, which affects how the frame is treated by filters/encoders.

field_mode

Available values are:

auto

Keep the same field property (default).

bff

Mark the frame as bottom-field-first.

tff

Mark the frame as top-field-first.

prog

Mark the frame as progressive.

range

Available values are:

auto

Keep the same color range property (default).

unspecified, unknown

Mark the frame as unspecified color range.

limited, tv, mpeg

Mark the frame as limited range.

full, pc, jpeg

Mark the frame as full range.

color_primaries

Set the color primaries. Available values are:

auto

Keep the same color primaries property (default).

bt709, unknown, bt470m, bt470bg, smpte170m, smpte240m, film, bt2020, smpte428, smpte431, smpte432, jedec-p22

color_trc

Set the color transfert. Available values are:

auto

Keep the same color trc property (default).

bt709, unknown, bt470m, bt470bg, smpte170m, smpte240m, linear, log100, log316, iec61966-2-4, bt1361e, iec61966-2-1, bt2020-10, bt2020-12, smpte2084, smpte428, arib-std-b67

colorspace

Set the colorspace. Available values are:

auto

Keep the same colorspace property (default).

gbr, bt709, unknown, fcc, bt470bg, smpte170m, smpte240m, ycgco, bt2020nc, bt2020c, smpte2085, chroma-derived-nc, chroma-derived-c, ictcp