This filter has some handy utilities to manage stereo signals, for converting M/S stereo recordings to L/R signal while having control over the parameters or spreading the stereo image of master track.
The filter accepts the following options:
- level_in
-
Set input level before filtering for both channels. Defaults is 1. Allowed range is from 0.015625 to 64.
- level_out
-
Set output level after filtering for both channels. Defaults is 1. Allowed range is from 0.015625 to 64.
- balance_in
-
Set input balance between both channels. Default is 0. Allowed range is from -1 to 1.
- balance_out
-
Set output balance between both channels. Default is 0. Allowed range is from -1 to 1.
- softclip
-
Enable softclipping. Results in analog distortion instead of harsh digital 0dB clipping. Disabled by default.
- mutel
-
Mute the left channel. Disabled by default.
- muter
-
Mute the right channel. Disabled by default.
- phasel
-
Change the phase of the left channel. Disabled by default.
- phaser
-
Change the phase of the right channel. Disabled by default.
- mode
-
Set stereo mode. Available values are:
- lr>lr
-
Left/Right to Left/Right, this is default.
- lr>ms
-
Left/Right to Mid/Side.
- ms>lr
-
Mid/Side to Left/Right.
- lr>ll
-
Left/Right to Left/Left.
- lr>rr
-
Left/Right to Right/Right.
- lr>l+r
-
Left/Right to Left + Right.
- lr>rl
-
Left/Right to Right/Left.
- slev
-
Set level of side signal. Default is 1. Allowed range is from 0.015625 to 64.
- sbal
-
Set balance of side signal. Default is 0. Allowed range is from -1 to 1.
- mlev
-
Set level of the middle signal. Default is 1. Allowed range is from 0.015625 to 64.
- mpan
-
Set middle signal pan. Default is 0. Allowed range is from -1 to 1.
- base
-
Set stereo base between mono and inversed channels. Default is 0. Allowed range is from -1 to 1.
- delay
-
Set delay in milliseconds how much to delay left from right channel and vice versa. Default is 0. Allowed range is from -20 to 20.
- sclevel
-
Set S/C level. Default is 1. Allowed range is from 1 to 100.
- phase
-
Set the stereo phase in degrees. Default is 0. Allowed range is from 0 to 360.